/ CUT 100 CNC
Crepow Portable Inverter IGBT Non HF/Pilot ARC Air Plasma Cutter 100A with CNC Connector 380V/400V/415V
CUT 100 CNC
FEATURES
-
Three Phases 380Volts Input voltage
-
Pilot Arc Start increases cutting capability and cutting speed,
it also improves working life of torch parts
-
90% High Duty Cycle at 60amps and 40°C
-
Arc is started Without High-frequency, so it will not disturb
or damage controllers or computers
-
Grid Cutting is available
-
Air Flow Checking function is included
-
CNC Cutting Function and Connector is optional
-
Built-in protection Circuit of over temperature and over voltage and over current for better reliability
-
Generator friendly allows to work with diesel generators and avoid failures due to its voltage spikes
SPECIFICATIONS
CONTROL PANEL
1. Cutting current knob: It is used to adjust current.
2. Power indicator: When the machine is connected to the power supply, the indicator lights on.
3. Alarm indicator: When over-heat or over-current, the indicator lights on.
4. Current display: It shows cutting current.
5. Gun and gas alarm indicator.
6. Barometer display: It shows the size of air pressure.
7. DC indicator: When DC output circuit is active, the indicator lights on.
8. RUN/Air pressure select switch.
OPTIONAL ACCESSORY
PLASMA Torch-SC120
Earth Lead
(10mm²+300A Earth Clamp)
Gas Hose
Copyright © 2023 CREPOW Inc. All rights reserved.