/ CUT 80 HF
Crepow Smart Inverter IGBT HF/Pilot ARC Air Plasma Cutter 80A 380V/400V/415V
CUT 80 HF
Digital meter is easy to read display current and air pressure
Built-in Air filter and regulator
Plasma Central connector makes torch connection quicker
Pilot Arc Start increases cutting capability and cutting speed,
it also improves working life of torch and torch parts
2T/4T makes job more easier and comfortable
Postflow cooling circuitry extends life of the
consumable and torch by cooling them with postflow air after trigger is released
Built-in Protection Circuit of over temperature and over voltage and over current for better reliability
1. Cutting current knob: It is used to adjust current.
2. Power indicator: When the machine is connected to the power supply, the indicator lights on.
3. Alarm indicator: When over-heat or over-current, the indicator lights on.
4. Current display: It shows cutting current.
5. 2T/4T Switch: Turn up for 2T mode, and down for 4T mode.
6. Air pressure/RUN select switch.
(10mm²+300A Earth Clamp)
Copyright © 2023 CREPOW Inc. All rights reserved.